Main Menu
Home
Boat Handeling
Destinations
Equipment
Renovation
News
Renovation & Maintenance
Float switch
Rebulding a marine engine
a float switch
Sheep's grease for props
Recreating a cabin
Changing the oil
Check out your electrics
Dip for a better grip
Going for a wrap
Instrument Calibration
Sailing by the seat.
Self build a sailboat trailer
Self build a sailboat trailer , 2
Tightening and Tuning Your Rig
Building a boat from bits
circuit breakers on boats
Fitting a marine alternator
Fitting a marine alternator, 2
Gas Barbecue for the boat
Gel Coat Blisters on boats
Hull shapes on motor boats
Saving Gel Coat from Blisters

Home arrow Renovation
Renovation
Navtex, Nasa Target
User Rating: / 0

 

The NASA Target Navtex Pro isn't new, but has come a very long way from its shaky origins of 10 years ago. We're taking a close look because in North Biscay and Mallorca other boats were receiving clear text, while my Lokata was getting nothing - which was probably something to do with NASA's pre amplified whip antenna.

 

Read more...
 
Navigation Aid, Garmin GPS
User Rating: / 0

The Garmin Three Plus hand-held GPS is top of my list, replacing a Garmin III as our GPS back-up. Last summer, a fellow radio ham got us lost in some French mountains, but the Garmin III helped us work out where we were.

Read more...
 
Motor Boat Wave Patterns
User Rating: / 1

Any boat when it's moving produces several clifferent wave patterns. But, producing waves involves expending energy, so the smaller the waves you can make, the better. At low speeds, the drag is almost all friction. At 'hull speed' and beyond, it's wave-making drag that dominates.
As a boat starts moving forward, a bow wave appears with a shallow trough and a secondary wave forming behind it. There's also a stem wave, but we can ignore this for the moment. As boat speed increases, so does the wavelength between bow wave and secondary. When the speed (in knots) is equal to about 1.34 times the square root of the waterline length (in feet), the wavelength and the boat's waterline length will be equal, and the secondary wave will be at the stem. The boat is now at its 'hull speed'.

Read more...
 
Man Overboard, part2
User Rating: / 0

To prevent headsails, young children or even pets going overboard, it's common to see netting laced between the upper wire and the deck, particularly forward: and remember, bowsprits also need safety netting.
A frrm hand-hold on top of a well braced steering pedestal is useful but the crucial moment arises when you want to step out of the cockpit and go forward. Many boats have strategically placed grab rails to cling on to - sometimes incorporated into the spray hood.

Read more...
 
Man Overboard, part1
User Rating: / 1

BoatsExplained.com tells us how to avoid it

AtheY set off on a round the world race, a well known skipper told his crew "if
you fall overboard, I'm not coming back." It caused quite a stir at the time, but serves to highlight two important points. The fIrst is to impress on any crew that they have a responsibility to stay aboard. Secondly, it recognises that our attention is best directed to prevention rather than cure.

Read more...
 
<< Start < Prev 1 2 3 4 5 6 7 8 9 Next > End >>

Results 10 - 18 of 79