Main Menu
Home
Boat Handeling
Destinations
Equipment
Renovation
News
News

Home arrow News
News
Latch on the hatch
User Rating: / 0
Put a latch on the hatch
Having introduced their Hatch-Latch companionway security system a year or two ago, Osprey Marine have now added two more versions. Made from 316-grade stain-less steel, the original HL 1000 design is made to fit traditional style hatches with a sufficiently deep
Read more...
 
Spraying cool
User Rating: / 0
Spraying cool
Sailors in this country seldom expose themselves to the risk of over-heating, but in case of a heat-wave this summer, you might find a can of Magicool a useful addition to the first aid box. Available in 150 and 200ml pressurised cans, it's a patented spray designed to cool you
Read more...
 
Steps in stainless
User Rating: / 0
If you find stepping aboard a high-sided boat from a dinghy or pontoon a bit of a stretch, you could try one of Spray Stainless Engineering's One Step safety ladders. Made of 316 grade (A4) stainless steel with a 6.5 x 17.5in (167 x 446mm) non-slip glassfi­bre step,
Read more...
 
Rebulding a marine engine
User Rating: / 3
Cooling without corrosion
SOME engine manufacturers say that after a few years use, it's pointless to convert marine engines from sea to freshwater cooling - but of course, they're in the business of selling engines so have little interest in increasing an engine's life..
What flows though a raw-water cooled engine is warm seawater, which is extremely corrosive. Replacing this aggressive solution with a 50-50% mix of freshwater and anti-freeze will virtu­ally stop the process.
When we bought Alston Prince, our 26ft Colvic Sailer, back in 1995 the engine was 10 years old and just start­ing to show corrosion problems. Some blistering of the paint and a crust of white powder on the number one cylin­der head joint, hinted that things weren't as they should be. Further investigation revealed that the alumini­um cylinder head was being eaten away by the saltwater - despite the sacrificial anode having plenty of zinc left on it.
Clearly, this engine wasn't going to last us another 10 years so something had to be done about it - and preferably without too much expense.
Going it alone
Read more...
 
Vetus Generators
User Rating: / 1
A good way to annoy your neighbours in a quiet anchor-age, say Vetus, is to run a generator with the exhaust watersplashing overboard
Read more...
 
<< Start < Prev 1 2 3 4 5 6 7 8 9 Next > End >>

Results 73 - 79 of 79