Main Menu
Home
Boat Handeling
Destinations
Equipment
Renovation
News
Boat Equipment
Radars Explained
Vetus Generators
Steps in stainless
Spraying cool
Latch on the hatch
Celluar Antennas
Radar Reflectors on sailboats
Radar Reflectors on Motorboats
Radar Reflectors on boats
Radar Reflectors & Accidents
Getting Muir for less
Fully-battened mainsails
Lightweight Shackle Key
VHF aerial
Plastic strip
Instruments on an open boat
It pays to shop around
Weatherfax
A place for everything
Differential GPS Antenna
Navigation Aid, Garmin GPS
Navtex, Nasa Target
Onboard power
Safe wireing on boats
Transparent pump conver
VHF radios on boats
Waterproof case, Aquapac
Waterproof VHF radio, Garmin

Home arrow Equipment
Equipment
Latch on the hatch
User Rating: / 0
Put a latch on the hatch
Having introduced their Hatch-Latch companionway security system a year or two ago, Osprey Marine have now added two more versions. Made from 316-grade stain-less steel, the original HL 1000 design is made to fit traditional style hatches with a sufficiently deep
Read more...
 
Spraying cool
User Rating: / 0
Spraying cool
Sailors in this country seldom expose themselves to the risk of over-heating, but in case of a heat-wave this summer, you might find a can of Magicool a useful addition to the first aid box. Available in 150 and 200ml pressurised cans, it's a patented spray designed to cool you
Read more...
 
Steps in stainless
User Rating: / 0
If you find stepping aboard a high-sided boat from a dinghy or pontoon a bit of a stretch, you could try one of Spray Stainless Engineering's One Step safety ladders. Made of 316 grade (A4) stainless steel with a 6.5 x 17.5in (167 x 446mm) non-slip glassfi­bre step,
Read more...
 
Rebulding a marine engine
User Rating: / 3
Cooling without corrosion
SOME engine manufacturers say that after a few years use, it's pointless to convert marine engines from sea to freshwater cooling - but of course, they're in the business of selling engines so have little interest in increasing an engine's life..
What flows though a raw-water cooled engine is warm seawater, which is extremely corrosive. Replacing this aggressive solution with a 50-50% mix of freshwater and anti-freeze will virtu­ally stop the process.
When we bought Alston Prince, our 26ft Colvic Sailer, back in 1995 the engine was 10 years old and just start­ing to show corrosion problems. Some blistering of the paint and a crust of white powder on the number one cylin­der head joint, hinted that things weren't as they should be. Further investigation revealed that the alumini­um cylinder head was being eaten away by the saltwater - despite the sacrificial anode having plenty of zinc left on it.
Clearly, this engine wasn't going to last us another 10 years so something had to be done about it - and preferably without too much expense.
Going it alone
Read more...
 
Vetus Generators
User Rating: / 1
A good way to annoy your neighbours in a quiet anchor-age, say Vetus, is to run a generator with the exhaust watersplashing overboard
Read more...
 
<< Start < Prev 1 2 3 4 5 6 7 8 9 Next > End >>

Results 73 - 79 of 79