Main Menu
Home
Boat Handeling
Destinations
Equipment
Renovation
News
Renovation & Maintenance
Float switch
Rebulding a marine engine
a float switch
Sheep's grease for props
Recreating a cabin
Changing the oil
Check out your electrics
Dip for a better grip
Going for a wrap
Instrument Calibration
Sailing by the seat.
Self build a sailboat trailer
Self build a sailboat trailer , 2
Tightening and Tuning Your Rig
Building a boat from bits
circuit breakers on boats
Fitting a marine alternator
Fitting a marine alternator, 2
Gas Barbecue for the boat
Gel Coat Blisters on boats
Hull shapes on motor boats
Saving Gel Coat from Blisters

Home arrow Changing the oil
Portable pump lor changing the oil
User Rating: / 0
PoorBest 
For simple oi changes without 2 permanently- installec pump, Reverso hav introduced the portable, DC-powere OP-700 series. All : do, we're told, is co. the pump to a power remove the dipsticks . Push the suction hose over the fitting, and place the discharge hose into a waste container. Then you flip the switch and empty the sump. Since the pump is reversible, you can refill with fresh oil by moving the discharge hose over to a clean supply and pushing the switch the other way.
Covered with a stainless steel plate and supplied on a mount­ing board, the OP-700 pumps are designed for both hot and cold oil. They come in 2 to 6 valve versions for 12 or 24v supplies, and cost from around £300. Check your normal online boat equipment site for more exact prices.
 
< Prev   Next >
[ Back ]