Main Menu
Home
Boat Handeling
Destinations
Equipment
Renovation
News
Renovation & Maintenance
Float switch
Rebulding a marine engine
a float switch
Sheep's grease for props
Recreating a cabin
Changing the oil
Check out your electrics
Dip for a better grip
Going for a wrap
Instrument Calibration
Sailing by the seat.
Self build a sailboat trailer
Self build a sailboat trailer , 2
Tightening and Tuning Your Rig
Building a boat from bits
circuit breakers on boats
Fitting a marine alternator
Fitting a marine alternator, 2
Gas Barbecue for the boat
Gel Coat Blisters on boats
Hull shapes on motor boats
Saving Gel Coat from Blisters

Home arrow Dip for a better grip
Portable pump lor changing the oil
User Rating: / 0
PoorBest 
For simple oi changes without 2 permanently- installec pump, Reverso hav introduced the portable, DC-powere OP-700 series. All : do, we're told, is co. the pump to a power remove the dipsticks . Push the suction hose over the fitting, and place the discharge hose into a waste container. Then you flip the switch and empty the sump. Since the pump is reversible, you can refill with fresh oil by moving the discharge hose over to a clean supply and pushing the switch the other way.
Covered with a stainless steel plate and supplied on a mount­ing board, the OP-700 pumps are designed for both hot and cold oil. They come in 2 to 6 valve versions for 12 or 24v supplies, and cost from around £300. Check your normal online boat equipment site for more exact prices.
 
< Prev   Next >
[ Back ]